Pinion gear 13 teeth
Pinion 13 teeth steel 520 pitch (5 / 8x1 / 4)
For sprockets only the steel 16 MnCR 5 according to OEM quality on high-precision
CNC lathes machined. Due to the special gearing process as well as a
Case hardening of 700 HV 40 at a depth of use of 0.4 mm are fulfilled by our pinions
highest quality standards. With modern broaching machines we guarantee an exact
Passing dimension on the drive shaft with a round and axial tolerance of less than 0.1mm.
Note: screws not included.
For sprockets only the steel 16 MnCR 5 according to OEM quality on high-precision
CNC lathes machined. Due to the special gearing process as well as a
Case hardening of 700 HV 40 at a depth of use of 0.4 mm are fulfilled by our pinions
highest quality standards. With modern broaching machines we guarantee an exact
Passing dimension on the drive shaft with a round and axial tolerance of less than 0.1mm.
Note: screws not included.